¿Tiene alguna utilidad para mostrar los resultados? Que el método de Niko Brummers es interesante, pero creo que no es muy precisa. Voy a tratar de explicar por qué no. La velocidad del eje changse rápidamente en los primeros 0,5 m. Si usted tiene marcas en cada 5 mm, que está a sólo 20 marcas en 10 cm. Si se mide la frecuencia de la señal, en la que 10 cm de largo de la trayectoria de parte, deberá error normalito 2,5%. Máximo del 5%, min 0%. Si la velocidad es de 30 m/s el resultado podría ser de entre 28,5 m/s casos mejor y 30 m/s, en. Si las marcas se encuentran en 10 mm, el error es dos veces superior. Inconveniente siguiente es que usted no puede hacer la medición real con varios tipos y grosor de la línea.
Have you any useful results to show? That Niko Brummers method is interesting but I believe it is not very accurate. I will try to explain why not. The speed of the shaft changse rapidly in first 0,5 m. If you have marks on every 5 mm, that is only 20 marks on 10 cm. If you measure the frequency of that signal, in that 10 cm long part of trajectory, you will have avarage 2,5 % error. Max 5 %, min 0 %. If the speed is 30 m/s your result could be between 28,5 m/s and 30 m/s, in best case. If the marks are on 10 mm, the error is twice higher. Next drawback is that you can not make real measurement with various type and thickness of the line.