Autor Tema: Desmontaje fusil  (Leído 1371 veces)

0 Usuarios y 1 Visitante están viendo este tema.

Desconectado tromic

  • Usuario 250 - 999 posts
  • ***
  • Mensajes: 682
  • Ha sido agradecido: 32 veces
Desmontaje fusil
« en: 26 de Mayo de 2012, 01:25:08 pm »
I was just thinking about the safest method regarding the gun. Unscrewing the muzzle is the most critical step in dismantling. There is a high possibility that inner barrel would turn with the muzzle what would cause a damage to trigger mechanism parts and a plastic part in a handle that protrudes and is engaged with inner barrel slot to ensure the right position of the inner barrel. I would advice as a safest method in dismantling the speargun to start with removing the rear handle first: trigger mechanism, inlet valve, handle itself, ... Removing the handle must be without rotating movement regarding the muzzle and inner barrel. Only gentle wobbling movement is allowed.

Yo estaba pensando en el método más seguro con respecto a la pistola. Desenroscar la boca del cañón es el paso más importante en el desmantelamiento. Existe una alta posibilidad de que barril interno a su vez con la boca lo que podría causar un daño para accionar las partes del mecanismo y una pieza de plástico en un mango que sobresale y se acopla con la ranura de barril interno para asegurar la posición correcta del barril interno.  Yo aconsejaría como un método más seguro en el desmantelamiento del fusil para comenzar con la eliminación de la empuñadura trasera en primer lugar: mecanismo de activación, la válvula de entrada, manejar en sí, ... Extracción del mango debe ser sin movimiento de rotación sobre la boca del cañón y el cilindro interior. Sólo el movimiento suave bamboleo está permitido.
 

Tags: