Autor Tema: SIETE PREGUNTAS SOBRE GOMAS...  (Leído 4374 veces)

0 Usuarios y 1 Visitante están viendo este tema.

LucasS

  • Visitante
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #15 en: 02 de Junio de 2006, 04:57:42 pm »
Otra cosa sobre lo del color negro y los rayos del sol.
Hasta donde yo tengo entendido y y probado el negro atrae mas los rayos del sol que cualquier otro color, si fuera por proteccion al los rayos el mejor seria el color blanco ya que como dije el negro es el color que mas atrae los rayos del sol.

Saludos
 

Desconectado Asturven

  • Usuario 1.000 - 4.999 posts
  • ****
  • Mensajes: 2168
  • Ha sido agradecido: 2 veces
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #16 en: 02 de Junio de 2006, 06:05:25 pm »
Lucas

Lo que tu comentas es simplemente por calor.

El blanco difumina el Calor mejor que el Negro, pero aqui lo que importa son los Rayos UV.

Que como cosa curiosa el mejor color para proteger en contra de los Rayos UV en cristales es el Ambar.
Por eso que la mayoria de los medicamentos vienen en botellas ambar y las cervezas buenas vienen en botellas ambar.

Pero como que a las Gomas eso no le va.
 

Desconectado memo

  • Usuario 250 - 999 posts
  • ***
  • Mensajes: 896
  • Ha sido agradecido: 10 veces
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #17 en: 04 de Junio de 2006, 04:33:21 am »
Gelucho, que una goma se vuelva pegajosa de la noche a la mañana, se debe en la mayor parte de los casos a que haya entrado en contacto con grasas, aceites y/o hidrocarburos.
Segun pude ver, la fabrica en cuestion no es Kent Elastomer, pues lo cita como referencia, pues resulta que Kent Elastomer es el mas grande productor de gomas para Pesca Submarina, pues a traves de su comercializadora internacional DUNLAP , no Dunlop, son cosas distintas, provee a : picasso, omer, marc valentin, spetton,Metalsub etc produce una nueva goma, mas resistente a los UV y a las ataduras, ver :
www.kentelastomer.com
la Fabrica, omitio de decir que guardadas al vacio (para evitar oxidacion) en bolsas negras de plastico de buen calibre y a menos de 5íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°C el proceso de envejecimiento del latex se detiene, por lo tanto, con este metodo se pueden guardar gomas "Maduras" o sea en su mejor estado indefinidamente. yo hago 3 pedidos al año y en años exepcionales 4, por lo tanto no tengo ese tipo de problemas, pues las gomas duran como mucho 4 meses y aparte de las de mostrador, las demas estan refrigeradas.
hay unos exelentes estudios en la revista apnea escritos por Josetxo M. sobre el latex
 Por curiosidad, íƒÆ’í¢â‚¬Å¡íƒâ€š¿cual es la Fabrica?
Los peces tienen derechos y debemos respetarlos, los principales son: derecho a una buena receta, a quedar bien deliciosos y a la compañ©¡ de una buena bebida en la mesa
 

Desconectado Asturven

  • Usuario 1.000 - 4.999 posts
  • ****
  • Mensajes: 2168
  • Ha sido agradecido: 2 veces
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #18 en: 04 de Junio de 2006, 05:42:52 pm »
Memo,

Aparte del tradicional metodo de bolsa negra y para la nevera, las mejores bolsas para mantener las gomas son las que estan hecha con un material que se llama Impenetron. Con este material se mantienen por años sin neceisdad de refrigerarlas.

La otra fabrica debe de ser Primeline que tambien esta en Ohio.

Saludos

Ivan
 

Desconectado Marco

  • Usuario + 10.000 posts
  • ******
  • Mensajes: 18830
  • Ha sido agradecido: 2265 veces
  • Sexo: Masculino
  • Miami, Florida
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #19 en: 05 de Junio de 2006, 12:25:40 am »
Exacto una puta mierda y por eso los Condones tienen fecha de vencimiento.

Yo gozo una bola con esas "mierdas"  ;D Y también pescando con las otras "mierdas"...  8)
Un mal día de pesca es SIEMPRE mejor que un buen dí­a de trabajo



 

Desconectado RobertoReyes

  • Usuario 250 - 999 posts
  • ***
  • Mensajes: 468
  • Sexo: Masculino
    • http://puertoricofreedivers.com
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #20 en: 05 de Junio de 2006, 01:48:03 am »
 Que lio.
 A ver si entendi.
 Los condones son hechos para meterselos a Impenetron?.
 Y ademas de eso, donde no le da la luz y friito?
La vida no puede ser medida por las respiraciones que tomamos, sino por esos momentos magicos que nos dejan sin respiracion.
 

Izand

  • Visitante
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #21 en: 05 de Junio de 2006, 09:19:15 am »
Que lio.
 A ver si entendi.
 Los condones son hechos para meterselos a Impenetron?.
 Y ademas de eso, donde no le da la luz y friito?

 ;D ;D ;D ;D ;D
 

Desconectado Asturven

  • Usuario 1.000 - 4.999 posts
  • ****
  • Mensajes: 2168
  • Ha sido agradecido: 2 veces
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #22 en: 05 de Junio de 2006, 02:05:13 pm »
La verdad que es algo confuso,

Usas Condones negros y los impenetronas donde hace friito,
pero cuidado porque los UV los ponen pegajosos y si te pasas de la fecha se rompen o algo asi.
 

Desconectado AlexisBellorin

  • Usuario 1.000 - 4.999 posts
  • ****
  • Mensajes: 1057
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #23 en: 05 de Junio de 2006, 02:12:43 pm »
La verdad que es algo confuso,

Usas Condones negros y los impenetronas donde hace friito,
pero cuidado porque los UV los ponen pegajosos y si te pasas de la fecha se rompen o algo asi.

Lo único que tienen que hacer es quitarse los condones un rato después de usarlo (como las gomas de los "arba")...

Un campesino por aquí usó por primera vez condones y se los dejó puesto meses (meaba adentro)... hasta no asegurarse que la mujer no desarrollara barriga... porque la mujer le dijo durante el acto que por nada del mundo se lo quitara, je je je

Saludos

Alexis
 

Desconectado Jose_Piratilla

  • Usuario 1.000 - 4.999 posts
  • ****
  • Mensajes: 1273
  • Ha sido agradecido: 1 veces
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #24 en: 05 de Junio de 2006, 02:36:10 pm »
Lucas

Lo que tu comentas es simplemente por calor.

El blanco difumina el Calor mejor que el Negro, pero aqui lo que importa son los Rayos UV.

Que como cosa curiosa el mejor color para proteger en contra de los Rayos UV en cristales es el Ambar.
Por eso que la mayoria de los medicamentos vienen en botellas ambar y las cervezas buenas vienen en botellas ambar.

Pero como que a las Gomas eso no le va.
Creo que tienes un error de concepto. No importa para nada el color de un material a la hora de reaccionar a los rayos UV. Depende del compuesto. El UV (o el conjunto de los UV) es un color más, que nosotros no vemos. Un negro muy negro puede ser blanco a los UV (y como no vemos los UV, para nosotros es negro) y por lo tanto rechazar los UV de forma efectiva.
Para ilustrarlo os pongo el ejemplo de no ver el rojo. A 20 metros casi no hay rojo, por lo que muchos de vosotros habéis estado en condiciones de no ver el rojo. Pongamos ahora un pez negro y otro rojo íƒÆ’í¢â‚¬Å¡íƒâ€š¿Que color tienen a 20 metros? el mismo, el negro. Pero si iluminamos intensamente con luz roja, el pez negro la absorbera (y se calentará) y el pez rojo no. Conclusion: Dos peces del mismo color (si no vemos el rojo) se comportan diferente ante luz roja.
Lo mismo pasa con los UV. Por eso decir que el ambar es el mejor color para rechazar los UV es falso. Es posible que el pigmento de los botes de medicamento y de las cervezas buenas tenga un gran rechazo al UV y que dé la casualidad de que es ambar. Pero eso no es extrapolable a todos los ambar, que pueden provenir de otros pigmentos y al ojo humano tener el mismo color ambar.
De esta manera quiero decir que el que el ambar de las cervezas buenas se use por sus propiedades anti-UV no implica que las gomas ambar sean mejores que las negras en el rechazo a los UV.
Este post puede ser una broma. En ningún momento el autor quiere criticar, menospreciar o burlarse de ningún otro miembro del foro o de sus comentarios. La entonación es un elemento muy importante de la comunicación, y aquí se carece de ella.
Si por cualquier motivo el presente post te ofende, considera el releerlo con la cara sonriente.

NO ALIMENTEMOS A LOS TROLLS!!
 

Desconectado memo

  • Usuario 250 - 999 posts
  • ***
  • Mensajes: 896
  • Ha sido agradecido: 10 veces
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #25 en: 07 de Junio de 2006, 05:41:38 am »
LO que pasa con el pigmento negro es lo siguiente:
los rayos UV atacan la superficie, pero el colorante o pigmento negro no los dejan atravesarlos por lo que no pueden atacar en profundidad las gomas, como si lo hacen con las gomas ambar.
Ivan, gracias por el dato, podrias decirme donde conseguir esas bolsas? y su volumen y precio?, no creo que la fabrica sea Primeline, pues ellos no hablarian asi, ellos son quienes fabrican las gomas para Jay Riffe, y si tyienen compuestos nuevos
Los peces tienen derechos y debemos respetarlos, los principales son: derecho a una buena receta, a quedar bien deliciosos y a la compañ©¡ de una buena bebida en la mesa
 

Desconectado memo

  • Usuario 250 - 999 posts
  • ***
  • Mensajes: 896
  • Ha sido agradecido: 10 veces
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #26 en: 07 de Junio de 2006, 06:03:23 am »
Y para terminar, aqui les envio la lista de compatibilidad del latex puro con diferentes productos para que vean que esto no es tan sencillo como parece pues el latex es incompatible con el jugo de frutas por ejemplo, asi, si cae jugo de frutas sobre las gomas y no las lavamos, o nos echamos protector solar y manoseamos las gomas sin lavarnos o limpiarnos debidamente las manos, solo diremos:" el vendedor nos estafo, nos vendio gomas viejas" lo cual no es cierto,  pues las razones de deterioro pueden ser de las mas variadas aqui la tabla, copiada del sitio de primeline:
Chemical Compatability Chart  Primeline Industries
Natural Rubber Latex Tubing

A = Excellent, B = Good, C = Fair, D = Severly Effected
N/A - Information is not available

Chemical Compatibility
Acetaldehyde C- Fair
Acetamide D- Severe Effect
Acetate Solvent C- Fair
Acetic Acid B- Good
Acetic Acid 20% B- Good
Acetic Acid 80% C- Fair
Acetic Acid, Glacial C- Fair
Acetic Anhydride C- Fair
Acetone C- Fair
Acetyl Bromide N/A
Acetyl Chloride (dry) D- Severe Effect
Acetylene B- Good
Acrylonitrile B1- Good
Adipic Acid A1- Excellent
Alcohols:Amyl B- Good
Alcohols:Benzyl D- Severe Effect
Alcohols:Butyl A- Excellent
Alcohols:Diacetone D- Severe Effect
Alcohols:Ethyl A- Excellent
Alcohols:Hexyl A- Excellent
Alcohols:Isobutyl A- Excellent
Alcohols:Isopropyl A- Excellent
Alcohols:Methyl A- Excellent
Alcohols:Octyl B- Good
Alcohols:Propyl A- Excellent
Aluminum Chloride A- Excellent
Aluminum Chloride 20% A- Excellent
Aluminum Fluoride B- Good
Aluminum Hydroxide D- Severe Effect
Aluminum Nitrate A1- Excellent
Aluminum Potassium Sulfate 10% A- Excellent
Aluminum Potassium Sulfate 100% A- Excellent
Aluminum Sulfate A- Excellent
Alums A- Excellent
Amines B- Good
Ammonia 10% D- Severe Effect
Ammonia Nitrate N/A
Ammonia, anhydrous D- Severe Effect
Ammonia, liquid D- Severe Effect
Ammonium Acetate N/A
Ammonium Bifluoride N/A
Ammonium Carbonate A- Excellent
Ammonium Caseinate N/A
Ammonium Chloride A- Excellent
Ammonium Hydroxide D- Severe Effect
Ammonium Nitrate C- Fair
Ammonium Oxalate N/A
Ammonium Persulfate A- Excellent
Ammonium Phosphate, Dibasic A- Excellent
Ammonium Phosphate, Monobasic A- Excellent
Ammonium Phosphate, Tribasic A- Excellent
Ammonium Sulfate A- Excellent
Ammonium Sulfite A2- Excellent
Ammonium Thiosulfate N/A
Amyl Acetate D- Severe Effect
Amyl Alcohol B- Good
Amyl Chloride D- Severe Effect
Aniline D- Severe Effect
Aniline Hydrochloride A- Excellent
Antifreeze A- Excellent
Antimony Trichloride N/A
Aqua Regia (80% HCl, 20% HNO3) D- Severe Effect
Arochlor 1248 D- Severe Effect
Aromatic Hydrocarbons D- Severe Effect
Arsenic Acid B- Good
Arsenic Salts N/A
Asphalt D- Severe Effect
Barium Carbonate N/A
Barium Chloride A- Excellent
Barium Cyanide N/A
Barium Hydroxide A- Excellent
Barium Nitrate N/A
Barium Sulfate A- Excellent
Barium Sulfide A- Excellent
Beer A- Excellent
Beet Sugar Liquids A- Excellent
Benzaldehyde D- Severe Effect
Benzene D- Severe Effect
Benzene Sulfonic Acid A- Excellent
Benzoic Acid D- Severe Effect
Benzol D- Severe Effect
Benzonitrile N/A
Benzyl Chloride D- Severe Effect
Bleaching Liquors D- Severe Effect
Borax (Sodium Borate) A- Excellent
Boric Acid A- Excellent
Brewery Slop N/A
Bromine D- Severe Effect
Butadiene D- Severe Effect
Butane D- Severe Effect
Butanol (Butyl Alcohol) A- Excellent
Butter D- Severe Effect
Buttermilk D- Severe Effect
Butyl Amine D- Severe Effect
Butyl Ether D- Severe Effect
Butyl Phthalate D- Severe Effect
Butylacetate D- Severe Effect
Butylene D- Severe Effect
Butyric Acid D- Severe Effect
Calcium Bisulfate A- Excellent
Calcium Bisulfide D- Severe Effect
Calcium Bisulfite D- Severe Effect
Calcium Carbonate A- Excellent
Calcium Chlorate A- Excellent
Calcium Chloride A- Excellent
Calcium Hydroxide A- Excellent
Calcium Hypochlorite D- Severe Effect
Calcium Nitrate A1- Excellent
Calcium Oxide B- Good
Calcium Sulfate B- Good
Calgon A- Excellent
Cane Juice A- Excellent
Carbolic Acid (Phenol) D- Severe Effect
Carbon Bisulfide D- Severe Effect
Carbon Dioxide (dry) B- Good
Carbon Dioxide (wet) B- Good
Carbon Disulfide D- Severe Effect
Carbon Monoxide D- Severe Effect
Carbon Tetrachloride D- Severe Effect
Carbon Tetrachloride (dry) D- Severe Effect
Carbon Tetrachloride (wet) D- Severe Effect
Carbonated Water N/A
Carbonic Acid C- Fair
Catsup N/A
Chloric Acid N/A
Chlorinated Glue N/A
Chlorine (dry) D- Severe Effect
Chlorine Water C- Fair
Chlorine, Anhydrous Liquid C- Fair
Chloroacetic Acid D- Severe Effect
Chlorobenzene (Mono) D- Severe Effect
Chlorobromomethane D- Severe Effect
Chloroform D- Severe Effect
Chlorosulfonic Acid D- Severe Effect
Chocolate Syrup D- Severe Effect
Chromic Acid 10% D- Severe Effect
Chromic Acid 30% D- Severe Effect
Chromic Acid 5% B- Good
Chromic Acid 50% D- Severe Effect
Chromium Salts N/A
Cider N/A
Citric Acid A- Excellent
Citric Oils N/A
CloroxíƒÆ’í¢â‚¬Å¡íƒâ€ší‚® (Bleach) D- Severe Effect
Coffee A- Excellent
Copper Chloride C- Fair
Copper Cyanide A- Excellent
Copper Fluoborate N/A
Copper Nitrate C- Fair
Copper Sulfate >5% C- Fair
Copper Sulfate 5% C- Fair
Cream N/A
Cresols D- Severe Effect
Cresylic Acid D- Severe Effect
Cupric Acid B2- Good
Cyanic Acid N/A
Cyclohexane D- Severe Effect
Cyclohexanone D- Severe Effect
Detergents B- Good
Diacetone Alcohol N/A
Dichlorobenzene D- Severe Effect
Dichloroethane D- Severe Effect
Diesel Fuel D- Severe Effect
Diethyl Ether D- Severe Effect
Diethylamine A- Excellent
Diethylene Glycol A1- Excellent
Dimethyl Aniline D- Severe Effect
Dimethyl Formamide C- Fair
Diphenyl D- Severe Effect
Diphenyl Oxide D- Severe Effect
Dyes N/A
Epsom Salts (Magnesium Sulfate) B- Good
Ethane D- Severe Effect
Ethanol A- Excellent
Ethanolamine B- Good
Ether D- Severe Effect
Ethyl Acetate C- Fair
Ethyl Benzoate D- Severe Effect
Ethyl Chloride B- Good
Ethyl Ether D- Severe Effect
Ethyl Sulfate N/A
Ethylene Bromide C- Fair
Ethylene Chloride D- Severe Effect
Ethylene Chlorohydrin C- Fair
Ethylene Diamine B- Good
Ethylene Dichloride D- Severe Effect
Ethylene Glycol A- Excellent
Ethylene Oxide D- Severe Effect
Fatty Acids C- Fair
Ferric Chloride A- Excellent
Ferric Nitrate A- Excellent
Ferric Sulfate A- Excellent
Ferrous Chloride A- Excellent
Ferrous Sulfate B- Good
Fluoboric Acid A- Excellent
Fluorine C- Fair
Fluosilicic Acid A- Excellent
Formaldehyde 100% C- Fair
Formaldehyde 40% B- Good
Formic Acid C- Fair
Freon 113 D- Severe Effect
Freon 12 C- Fair
Freon 22 D- Severe Effect
Freon TF D- Severe Effect
FreoníƒÆ’í¢â‚¬Å¡íƒâ€ší‚® 11 D- Severe Effect
Fruit Juice D- Severe Effect
Fuel Oils D- Severe Effect
Furan Resin D- Severe Effect
Furfural D- Severe Effect
Gallic Acid A- Excellent
Gasoline (high-aromatic) D- Severe Effect
Gasoline, leaded, ref. D- Severe Effect
Gasoline, unleaded D- Severe Effect
Gelatin A- Excellent
Glucose A- Excellent
Glue, P.V.A. A- Excellent
Glycerin A- Excellent
Glycolic Acid D- Severe Effect
Gold Monocyanide N/A
Grape Juice D- Severe Effect
Grease D- Severe Effect
Heptane D- Severe Effect
Hexane D- Severe Effect
Honey A- Excellent
Hydraulic Oil (Petro) D- Severe Effect
Hydraulic Oil (Synthetic) D- Severe Effect
Hydrazine C- Fair
Hydrobromic Acid 100% A- Excellent
Hydrobromic Acid 20% A- Excellent
Hydrochloric Acid 100% D- Severe Effect
Hydrochloric Acid 20% A- Excellent
Hydrochloric Acid 37% A- Excellent
Hydrochloric Acid, Dry Gas N/A
Hydrocyanic Acid B- Good
Hydrocyanic Acid (Gas 10%) B- Good
Hydrofluoric Acid 100% D- Severe Effect
Hydrofluoric Acid 20% B1- Good
Hydrofluoric Acid 50% B1- Good
Hydrofluoric Acid 75% D- Severe Effect
Hydrofluosilicic Acid 100% A- Excellent
Hydrofluosilicic Acid 20% A- Excellent
Hydrogen Gas B- Good
Hydrogen Peroxide 10% B- Good
Hydrogen Peroxide 100% C- Fair
Hydrogen Peroxide 30% C- Fair
Hydrogen Peroxide 50% C- Fair
Hydrogen Sulfide (aqua) C- Fair
Hydrogen Sulfide (dry) C- Fair
Hydroquinone A- Excellent
Hydroxyacetic Acid 70% N/A
Ink D- Severe Effect
Iodine D- Severe Effect
Iodine (in alcohol) N/A
Iodoform B- Good
Isooctane A1- Excellent
Isopropyl Acetate D- Severe Effect
Isopropyl Ether A- Excellent
Isotane N/A
Jet Fuel (JP3, JP4, JP5) D- Severe Effect
Kerosene D- Severe Effect
Ketones A- Excellent
Lacquer Thinners D- Severe Effect
Lacquers D- Severe Effect
Lactic Acid A- Excellent
Lard D1- Severe Effect
Latex N/A
Lead Acetate A- Excellent
Lead Nitrate A1- Excellent
Lead Sulfamate B- Good
Ligroin D- Severe Effect
Lime N/A
Linoleic Acid D- Severe Effect
Lithium Chloride B1- Good
Lithium Hydroxide N/A
Lubricants D- Severe Effect
Lye: Ca(OH)2 Calcium Hydroxide B2- Good
Lye: KOH Potassium Hydroxide B- Good
Lye: NaOH Sodium Hydroxide A1- Excellent
Magnesium Bisulfate B2- Good
Magnesium Carbonate N/A
Magnesium Chloride A- Excellent
Magnesium Hydroxide A- Excellent
Magnesium Nitrate A- Excellent
Magnesium Oxide N/A
Magnesium Sulfate (Epsom Salts) B- Good
Maleic Acid B- Good
Maleic Anhydride D- Severe Effect
Malic Acid B- Good
Manganese Sulfate A2- Excellent
Mash N/A
Mayonnaise D- Severe Effect
Melamine N/A
Mercuric Chloride (dilute) A- Excellent
Mercuric Cyanide N/A
Mercurous Nitrate B1- Good
Mercury A- Excellent
Methane D- Severe Effect
Methanol (Methyl Alcohol) A- Excellent
Methyl Acetate D- Severe Effect
Methyl Acetone A- Excellent
Methyl Acrylate D- Severe Effect
Methyl Alcohol 10% A- Excellent
Methyl Bromide D- Severe Effect
Methyl Butyl Ketone D- Severe Effect
Methyl Cellosolve D- Severe Effect
Methyl Chloride D- Severe Effect
Methyl Dichloride N/A
Methyl Ethyl Ketone D- Severe Effect
Methyl Ethyl Ketone Peroxide D- Severe Effect
Methyl Isobutyl Ketone D- Severe Effect
Methyl Isopropyl Ketone D- Severe Effect
Methyl Methacrylate D- Severe Effect
Methylamine B- Good
Methylene Chloride B- Good
Milk A- Excellent
Mineral Spirits D- Severe Effect
Molasses A- Excellent
Monochloroacetic acid N/A
Monoethanolamine B- Good
Morpholine A1- Excellent
Motor oil N/A
Mustard B- Good
Naphtha D- Severe Effect
Naphthalene D- Severe Effect
Natural Gas N/A
Nickel Chloride A- Excellent
Nickel Nitrate A1- Excellent
Nickel Sulfate B- Good
Nitrating Acid (<15% HNO3) C- Fair
Nitrating Acid (>15% H2SO4) C- Fair
Nitrating Acid (íƒÆ’íƒâ€ší‚ 1% Acid) C- Fair
Nitrating Acid (íƒÆ’íƒâ€ší‚ 15% H2SO4) C- Fair
Nitric Acid (20%) D- Severe Effect
Nitric Acid (50%) D- Severe Effect
Nitric Acid (5-10%) D- Severe Effect
Nitric Acid (Concentrated) D- Severe Effect
Nitrobenzene D- Severe Effect
Nitrogen Fertilizer N/A
Nitromethane B1- Good
Nitrous Acid C- Fair
Nitrous Oxide A- Excellent
Oils:Aniline D- Severe Effect
Oils:Anise N/A
Oils:Bay N/A
Oils:Bone N/A
Oils:Castor A- Excellent
Oils:Cinnamon N/A
Oils:Citric N/A
Oils:Clove N/A
Oils:Coconut D- Severe Effect
Oils:Cod Liver D- Severe Effect
Oils:Corn D- Severe Effect
Oils:Cottonseed D- Severe Effect
Oils:Creosote D- Severe Effect
Oils:Diesel Fuel (20, 30, 40, 50) D- Severe Effect
Oils:Fuel (1, 2, 3, 5A, 5B, 6) D- Severe Effect
Oils:Ginger N/A
Oils:Hydraulic Oil (Petro) D- Severe Effect
Oils:Hydraulic Oil (Synthetic) D- Severe Effect
Oils:Lemon N/A
Oils:Linseed D- Severe Effect
Oils:Mineral D- Severe Effect
Oils:Olive D- Severe Effect
Oils:Orange N/A
Oils:Palm N/A
Oils:Peanut D- Severe Effect
Oils:Peppermint N/A
Oils:Pine D- Severe Effect
Oils:Rapeseed D- Severe Effect
Oils:Rosin N/A
Oils:Sesame Seed N/A
Oils:Silicone D- Severe Effect
Oils:Soybean D- Severe Effect
Oils:Sperm (whale) N/A
Oils:Tanning N/A
Oils:Transformer D- Severe Effect
Oils:Turbine D- Severe Effect
Oleic Acid D- Severe Effect
Oleum 100% D- Severe Effect
Oleum 25% D- Severe Effect
Oxalic Acid (cold) B- Good
Ozone D- Severe Effect
Palmitic Acid B1- Good
Paraffin B- Good
Pentane D- Severe Effect
Perchloric Acid N/A
Perchloroethylene D- Severe Effect
Petrolatum C- Fair
Petroleum D- Severe Effect
Phenol (10%) A- Excellent
Phenol (Carbolic Acid) D- Severe Effect
Phosphoric Acid (>40%) B- Good
Phosphoric Acid (crude) D- Severe Effect
Phosphoric Acid (molten) N/A
Phosphoric Acid (íƒÆ’íƒâ€ší‚ 40%) B- Good
Phosphoric Acid Anhydride N/A
Phosphorus N/A
Phosphorus Trichloride D- Severe Effect
Photographic Developer A- Excellent
Photographic Solutions B- Good
Phthalic Acid N/A
Phthalic Anhydride A- Excellent
Picric Acid D- Severe Effect
Plating Solutions,   Antimony Plating 130íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Arsenic Plating 110íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Brass Plating:     High-Speed Brass Bath 110íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Brass Plating:     Regular Brass Bath 100íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Bronze Plating:     Cu-Cd Bronze Bath R.T. N/A
Plating Solutions,   Bronze Plating:     Cu-Sn Bronze Bath 160íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Bronze Plating:     Cu-Zn Bronze Bath 100íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Cadmium Plating:     Cyanide Bath 90íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Cadmium Plating:     Fluoborate Bath 100íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Chromium Plating:     Barrel Chrome Bath 95íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Chromium Plating:     Black Chrome Bath 115íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Chromium Plating:     Chromic-Sulfuric Bath 130íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Chromium Plating:     Fluoride Bath 130íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Chromium Plating:     Fluosilicate Bath 95íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Copper Plating (Acid):     Copper Fluoborate Bath 120íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Copper Plating (Acid):     Copper Sulfate Bath R.T. N/A
Plating Solutions,   Copper Plating (Cyanide):     Copper Strike Bath 120íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Copper Plating (Cyanide):     High-Speed Bath 180íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Copper Plating (Cyanide):     Rochelle Salt Bath 150íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Copper Plating (Misc):     Copper (Electroless) N/A
Plating Solutions,   Copper Plating (Misc):     Copper Pyrophosphate N/A
Plating Solutions,   Gold Plating:     Acid 75íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Gold Plating:     Cyanide 150íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Gold Plating:     Neutral 75íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Indium Sulfamate Plating R.T. N/A
Plating Solutions,   Iron Plating:     Ferrous Am Sulfate Bath 150íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Iron Plating:     Ferrous Chloride Bath 190íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Iron Plating:     Ferrous Sulfate Bath 150íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Iron Plating:     Fluoborate Bath 145íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Iron Plating:     Sulfamate 140íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Iron Plating:     Sulfate-Chloride Bath 160íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Lead Fluoborate Plating N/A
Plating Solutions,   Nickel Plating:     Electroless 200íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Nickel Plating:     Fluoborate 100-170íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Nickel Plating:     High-Chloride 130-160íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Nickel Plating:     Sulfamate 100-140íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Nickel Plating:     Watts Type 115-160íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Rhodium Plating 120íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Silver Plating 80-120íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Tin-Fluoborate Plating 100íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Tin-Lead Plating 100íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Zinc Plating:     Acid Chloride 140íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Zinc Plating:     Acid Fluoborate Bath R.T. N/A
Plating Solutions,   Zinc Plating:     Acid Sulfate Bath 150íƒÆ’í¢â‚¬Å¡íƒâ€ší‚°F N/A
Plating Solutions,   Zinc Plating:     Alkaline Cyanide Bath R.T. N/A
Potash (Potassium Carbonate) A- Excellent
Potassium Bicarbonate A- Excellent
Potassium Bromide A- Excellent
Potassium Chlorate N/A
Potassium Chloride A- Excellent
Potassium Chromate B- Good
Potassium Cyanide Solutions A- Excellent
Potassium Dichromate B- Good
Potassium Ferricyanide B- Good
Potassium Ferrocyanide A- Excellent
Potassium Hydroxide (Caustic Potash) B- Good
Potassium Hypochlorite C1- Fair
Potassium Iodide B- Good
Potassium Nitrate A- Excellent
Potassium Oxalate N/A
Potassium Permanganate A1- Excellent
Potassium Sulfate A- Excellent
Potassium Sulfide B- Good
Propane (liquefied) D- Severe Effect
Propylene D- Severe Effect
Propylene Glycol A- Excellent
Pyridine D- Severe Effect
Pyrogallic Acid N/A
Resorcinal N/A
Rosins N/A
Rum A- Excellent
Rust Inhibitors N/A
Salad Dressings N/A
Salicylic Acid A- Excellent
Salt Brine (NaCl saturated) A- Excellent
Sea Water A1- Excellent
Shellac (Bleached) A1- Excellent
Shellac (Orange) D- Severe Effect
Silicone C- Fair
Silver Bromide N/A
Silver Nitrate A- Excellent
Soap Solutions B- Good
Soda Ash (see Sodium Carbonate) A- Excellent
Sodium Acetate A- Excellent
Sodium Aluminate B- Good
Sodium Benzoate A- Excellent
Sodium Bicarbonate A- Excellent
Sodium Bisulfate A- Excellent
Sodium Bisulfite A- Excellent
Sodium Borate (Borax) A- Excellent
Sodium Bromide A1- Excellent
Sodium Carbonate A- Excellent
Sodium Chlorate A- Excellent
Sodium Chloride A- Excellent
Sodium Chromate B- Good
Sodium Cyanide A- Excellent
Sodium Ferrocyanide B- Good
Sodium Fluoride N/A
Sodium Hydrosulfite C- Fair
Sodium Hydroxide (20%) A1- Excellent
Sodium Hydroxide (50%) A1- Excellent
Sodium Hydroxide (80%) A1- Excellent
Sodium Hypochlorite (<20%) C- Fair
Sodium Hypochlorite (100%) C- Fair
Sodium Hyposulfate C- Fair
Sodium Metaphosphate A- Excellent
Sodium Metasilicate A- Excellent
Sodium Nitrate B- Good
Sodium Perborate B- Good
Sodium Peroxide B- Good
Sodium Polyphosphate C- Fair
Sodium Silicate A- Excellent
Sodium Sulfate B- Good
Sodium Sulfide B- Good
Sodium Sulfite B- Good
Sodium Tetraborate A- Excellent
Sodium Thiosulfate (hypo) B- Good
Sorghum A- Excellent
Soy Sauce N/A
Stannic Chloride A- Excellent
Stannic Fluoborate N/A
Stannous Chloride A- Excellent
Starch A- Excellent
Stearic Acid N/A
Stoddard Solvent D- Severe Effect
Styrene D- Severe Effect
Sugar (Liquids) A- Excellent
Sulfate (Liquors) B- Good
Sulfur Chloride D- Severe Effect
Sulfur Dioxide N/A
Sulfur Dioxide (dry) C- Fair
Sulfur Hexafluoride D- Severe Effect
Sulfur Trioxide C- Fair
Sulfur Trioxide (dry) N/A
Sulfuric Acid (<10%) A1- Excellent
Sulfuric Acid (10-75%) C- Fair
Sulfuric Acid (75-100%) D- Severe Effect
Sulfuric Acid (cold concentrated) D- Severe Effect
Sulfuric Acid (hot concentrated) D- Severe Effect
Sulfurous Acid B- Good
Sulfuryl Chloride N/A
Tallow N/A
Tannic Acid A- Excellent
Tanning Liquors C- Fair
Tartaric Acid A- Excellent
Tetrachloroethane D- Severe Effect
Tetrachloroethylene D- Severe Effect
Tetrahydrofuran D- Severe Effect
Tin Salts A- Excellent
Toluene (Toluol) D- Severe Effect
Tomato Juice N/A
Trichloroacetic Acid C- Fair
Trichloroethane D- Severe Effect
Trichloroethylene D- Severe Effect
Trichloropropane D- Severe Effect
Tricresylphosphate B- Good
Triethylamine B- Good
Trisodium Phosphate A- Excellent
Turpentine D- Severe Effect
Urea N/A
Uric Acid N/A
Urine D- Severe Effect
Varnish D- Severe Effect
Vegetable Juice N/A
Vinegar B- Good
Vinyl Acetate D- Severe Effect
Vinyl Chloride C- Fair
Water, Acid, Mine B- Good
Water, Deionized A- Excellent
Water, Distilled A- Excellent
Water, Fresh A- Excellent
Water, Salt A- Excellent
Weed Killers N/A
Whey N/A
Whiskey & Wines A- Excellent
White Liquor (Pulp Mill) N/A
White Water (Paper Mill) N/A
Xylene D- Severe Effect
Zinc Chloride A- Excellent
Zinc Hydrosulfite N/A
Zinc Sulfate B- Good
Los peces tienen derechos y debemos respetarlos, los principales son: derecho a una buena receta, a quedar bien deliciosos y a la compañ©¡ de una buena bebida en la mesa
 

Desconectado Asturven

  • Usuario 1.000 - 4.999 posts
  • ****
  • Mensajes: 2168
  • Ha sido agradecido: 2 veces
  • Sexo: Masculino
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #27 en: 07 de Junio de 2006, 09:34:45 am »
Memo,

La verdad que yo le compro las gomas a Primeline y el servicio y la calidad es fenomenal. Me parece un poco extraño tambien que el comentario sea de ellos pero no conozco otro fabricante serio que se pueda referir a Dunlap como ellos lo hacen.

En cuanto a las bolsas de Impenetron, a mi me las enviaron desde Sudafrica la gente de Pelaj, pero se que son de fabricacion francesa.

Habria que buscar con calma en Europa.

Saludos

Ivan
 

Desconectado usuario

  • Fundador
  • *****
  • Mensajes: 1662
  • Ha sido agradecido: 31 veces
  • Sexo: Masculino
  • La Coruña
    • http://www.pescasub.com
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #28 en: 07 de Junio de 2006, 10:29:21 am »
Butter D- Severe Effect

Por eso no debe usarse mantequilla con el condón imprenetron. Todo se vuelve negro.
Comunicame cualquier abuso que veas en el web.
Anímate a ponerte un avatar o una firma.
Usa el "perfil" arriba a la derecha para hacerlo
 

Pau

  • Visitante
Re: SIETE PREGUNTAS SOBRE GOMAS...
« Respuesta #29 en: 07 de Junio de 2006, 10:52:53 am »
Me estoy riendo desde ayer con el tema este del impenetron  :D :D :D
 

Tags: