Buenas,
¿Has intentado diseñar un sistema de vacío que solo utilice corredera, sin necesiad de cambiar ninguna parte del fusil?
Por ejemplo en fusiles con piston de 11mm como el nuevo sten/cyrano/spark o el aribalete de omer, ya que al ser la caña de 11mm y alojar menos agua, la corredera no dedería ser muy grande.
Se que no es la solución más optima, Puesto que la corredera debería ser algo más grande perdiendo hidrodinamismo (habría que ver cuanto, para ver si es viable). Pero yo personalmente, como usuario final, estaría encantado si teniendo un fusil estandar de 11mm, con solo tapar los agujeros de salida de agua (poner la reductora en el caso del airbalete) y cambiar la corredera a la varilla tendría mi fusil estanco.
Sería la opción mas facil, ya que al final solo se trata de cambiarle la corredera a la varilla, sin tener que vaciar de aire el fusil. Y la más barata, ya que al final solo es comprar una corredera.
ahi te dejo la pregunta
. Un saludo
------------------------------------------------------------------------------------------
HI,
¿Have you tried to design a vacuum sistem that only uses slider, with no need to change any part of the gun?
For exmaple for guns with 11mm piston like the new sten/cyrano/spark or the omer airbalete, because of being 11mm inner barrel and hold less water, the slider should not be too big.
I know that is not the optimal solution, since the slider should be somewhat larger hydrodynamic losing (have to see how much, to see if feasible). But I personally, as an end user, would be happy if i have a standard 11mm gun, and just with pluging the water exit holes (put the gearbox in the case of airbalete) and changing the slider to the shaft, i would have my vacuum speargun.
It would be the easiest option, because at the end just about changing the slider of the shaft without having to empty air. And would be the cheapest, because in the end only needs to buy a slider.
i leave the question there
. A greeting