Que veo ya tienes los datos de medidas de un tovarich y me preguntaba si puedes acerlos igual?
To make it to be same I would need to have Tovarick kit because I haven't some internal mesures, like the groove dimension for O-ring. But I will not make it. I heard from one Australian user that Tovarich kit has higher friction to O-ring than TombaF. But because of that, shaft with Tovarich kit could be more bended, while loading.
"Hi Tomi,
The 8mm kit (tovarich) has more friction than the 7mm kit and doesn't perform quiet as well. (i have 2 different ones)
You could use the same body but not the top section for both 7&8mm.
I have never had to change a o-ring (thankfully it looks a lot harder to do than in a tomba F kit)
Yes 7mm 0ring is definitely 6.5(ID) x 3mm.
Also there is definitely more friction in the Tovarich kit 7mm than in the tombaF 7.14 kit."
Para llegar a ser el mismo que tendría que tener kit Tovarick porque yo no tengo algunos mesures internos, como la dimensión de la ranura para la junta tórica. Pero no voy a hacerlo. He oído de un usuario australiano que kit Tovarich tiene mayor fricción a la junta tórica de TombaF. Pero debido a eso, el eje con el kit Tovarich podría ser más doblada, mientras se carga.
"Hola Tomi,
El kit de 8 mm (tovarich) tiene más fricción que el kit de 7mm y no realiza tranquilo. (tengo 2 diferentes)
Usted podría utilizar el mismo cuerpo, pero no la parte de arriba, tanto para el 7 y 8 mm.
Nunca he tenido que cambiar un anillo tórico (por suerte se parece mucho más difícil de hacer que en un kit tomba F)
Sí 0ring 7mm es definitivamente 6,5 (ID) x 3mm.
También hay definitivamente más fricción en el kit de 7mm Tovarich que en el kit tombaF 7.14 ".