Muy buenas,
Veo que hay dos opciones para el tema varillas. Uno es comprar la varilla ya preparada para el fusil neumático ( Devoto/Salvimar), en este caso, conocéis alguna web que las venda ? Vendrían con el culatín entiendo
Y la otra opción, sería comprar cualquier varilla de 7mm , hacerle rosca en tornero, y ponerle culatín. Qué culatines son compatibles con nuestros Mares EVO ?
Parece ser que la mejora del Kit STC estanco serían menor retroceso, mayor velocidad en la varilla, más fácil cargar ... Esto me escribió Claudia, de STC .
The X power 2.0 evoid the water come into the barrel, so the shaft will goes out faster because the piston push out the shaft faster, and when the piston begins its run it move the air into the barrel, this air will open the lips of the seal and in this way the shaft goes out without touching the seal.
This mean that you will obtain best performance with less pressure! So you’ll load the gun more easily, you’ll will have no recoil , and you’ll save all the components: you’ll stress less the gun!
We think that a 6,75 mm shaft is the best diameter you can choose.
When you work in a watertight way, you need a strong piston.. you can use the original one , and then if after some shot i twill damage, you will change it.